fiber PM N1x2 nanosecond optical switch is connected to the optical path by connecting orblocking the optical signal. The switch has non-mechanical configurations and activated via an electrical control signal. Products are widely used in aerospace equipment and sensing system.
Features
·Solid-state high speed
·High Stability, High Reliability
·Epoxy-free on Optical Path
Applications
·Aerospace equipment
·Sensing system
·System monitoring
Specifications
Parameters | Unit | SUN-PM-N1x2 |
Wavelength Range | nm | 1260 ~ 1360 | 1500 ~ 1600 |
Test Wavelength | nm | 1310 | 1550 |
Insertion Loss 1, 2 | dB | ≤ 1.0 |
ER | dB | ≥ 18 |
Return Loss | dB | ≥ 50 |
Crosstalk 1 | dB | ≥ 18 |
Repeatability | dB | ≤ ±0.01 |
Switching Time | ns | ≤ 300 |
Operating Voltage 3 | V | 190 ~ 230 |
Durability | Cycles | ≥10 Billions |
Switch Type | NA | Non-Latching |
Maximum Optical Power | mW | ≤ 500 |
Operationg Temperature 4 | ℃ | -5 ~ +70 |
Storage Temperature | ℃ | -40 ~ +85 |
Dimension | mm | 28.0×7.5×7.5 ±0.2 |
Note: 1 Test at room temperature and SOP. 2 Excluding connectors, 0.2dB for one pair connectors. 3 Test at room temperature, each product with differentoperatingvoltage. 4 Different temperature with different operating voltage. |
