|
Fiberer PMS Series switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal. At the same time, the polarization state of the signal is preserved.
Performance Specifications
| Parameter |
Specification |
|
Operating Wavelength (nm) |
1310±40 |
1550±40 |
|
Insertion Loss (dB) |
0.8(Typ.), 1.2(Max.) |
|
Wavelength Dependent Loss (WDL) (dB) |
0.20 |
|
Extinction Ratio (dB) |
> 18 (typ 20) |
| Repeatibility(dB) |
±0.02 |
| Channel Cross Talk (dB) |
>60 |
|
Return Loss (dB) |
>55 |
| Switching Speed (ms) |
10 |
|
Operating Voltage (V) |
4.5 ~ 5.5 |
| Power Handling (mW) |
500 |
| Durability (cycles) |
10 Million (Min.) |
|
Operating Temperature (°C) |
0 ~ +70 |
| Fiber Type |
Panda PM fiber |
|
Dimensions (LxWxH) (mm) |
29x15x10 |
Electrical Pin Configuration:
|
Optical Path |
Port1~ Port3 and Port2 ~ Port4 |
Port1~ Port4 and Port ~ Port3 |
| Electric Drive |
Non-Latching |
|
|
Pin1 |
Pin10 |
|
Latching |
Pin10 |
Pin6 |
Pin1 |
Pin5 |
|
V+ |
GND |
V+ |
GND |
| Sensor Status |
Non Latching and Latching |
Pin2-3, Pin8-9 Close |
Pin2-3, Pin8-9 Open |
|
Pin3-4, Pin7-8 Open |
Pin3-4, Pin7-8 Close |
Specifications may change without notice
Dimensions
Ordering Information
PMS |
|
|
|
|
|
|
|
|
Option |
Operating Wavelength |
Port |
Grade |
Pigtail Style |
Fiber Length |
In/Out Connector |
|
L= Latching
N=Non- Latching |
15=1510~1610nm
13=1260~1360nm
|
0202=2x2 |
P=P Grade
|
1=Bare Fiber
2 =900um Jacket
|
1=1m
2=2m |
0=None
1=FC/APC
2=FC/PC
3=SC/APC
4=SC/PC
5=ST
6=LC | |
