|
Fiberer PMS Series switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. At the same time, the polarization state of the signal is preserved.
Performance Specifications
|
Parameter |
Specification |
|
Operating Wavelength (nm) |
1310, 1550 |
|
Insertion Loss (dB) |
0.8 |
|
Wavelength Dependent Loss (dB) |
0.15 |
|
Extinction Ratio (dB) |
>18 (typ.20) |
| Channel Cross Talk (dB) |
>55 |
| Repeatability (dB) |
±0.02 |
|
Return Loss (dB) |
>50 |
| Switching Speed (ms) |
10 (typ.4) |
|
Drive Voltage (V) |
5 |
| Power Handling (mW) |
500 |
| Durability (cycles) |
10 million |
|
Operating Temperature (°C) |
0 ~ +70 |
| Storage Temperature(°C) |
-40 ~ +85 |
| Fiber Type |
Panda PM fiber |
|
Dimensions (LxWxH) (mm) |
22.3x12x10 |
Electrical Pin Configuration:
|
Optical Path |
Port1 - Port2 |
Port1 - Port3 |
| Electric Drive |
Latching |
Pin1 |
Pin10 |
Pin1 |
Pin10 |
| |
V+ |
GND |
GND |
V+ |
| Sensor Status |
Latching |
Pin2-3, Pin8-9 Open |
Pin2-3, Pin8-9 Close |
|
Pin3-4, Pin7-8 Close |
Pin3-4, Pin7-8 Open |
Specifications may change without notice
Dimensions (mm)
Ordering Information
PMS |
|
|
|
|
|
|
|
|
Option |
Operating Wavelength |
Port |
Grade |
Pigtail Style |
Fiber Length |
In/Out Connector |
|
|
15=1550nm
13=1310nm
|
0102=1x2 |
P=P Grade
|
1= Bare Fiber
2=900um Jacket
|
1=1m
2=2m |
0=None
1=FC/APC
2=FC/PC
3=SC/APC
4=SC/PC
5=ST
6=LC | |
