Product Description
The 1x4 Nanosecond optical switch is connected to the optical path by connecting or blocking the optical signal. the switch has non-mechanical configurations and activated via an electrical control signal. Products are widely used in aerospace and military equipment..
Features
Applications
Functional Diagram
*.All the specifications are based on the devices without connectors, and guaranteed over the operating temperature ranges, wavelength ranges and all polarization states.
**. Specifications are subject to change without notice
Mechanical Dimensions (Unit: mm)
Electrical Driving Information
Type | Status | Optical Route | Electric Drive |
Pin1 | Pin2 | Pin3 | Pin4 | Pin5 | Pin6 | Pin7 | Pin8 |
N1x4 |
I
| Com-P1 | 0 | 0 | 0 | GND | 0 | 0 | V+ | V+ |
II
| Com-P2 | V+ | V+ | V+ | GND | 0 | 0 | V+ | V+ |
III | Com-P3 | 0 | V+ | V+ | GND | V+ | V+ | 0 | 0 |
IV | Com-P4 | V+ | 0 | 0 | GND | V+ | V+ | 0 | 0 |
Note: Voltage range is 300-350V,
Ordering Information：NSSW-N1*4ABCDEF
A | B | C | D | E | F |
Type | Mode | Wavelength | Fiber Diameter | Fiber Length | Connector |
B： Bidirectional | SM:SMF28 | 13: 1310nm 15: 1550nm | 25:250um 90:900um | 05:0.5m 10:1.0m 15:1.5m | OO:None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC LP: LC/PC LA
Solution
|
