FeaturesApplications100GHz ITU Channel SpacingLow Insertion LossWide Pass BandHigh Channel IsolationHigh Stability and ReliabilityEpoxy Free Optical PathChannel Add / DropDWDM NetworkWavelength RoutingFiber Optical AmplifierCATV Fiberoptic System Fiberer's 100GHz 2 Channel OADM utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging to achieve optical add or drop at a ITU wavelength. It provides ITU channel center wavelength, low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path . It can be used for wavelength add/drop in telecommunication network system. All Fiberer's products are Telcordia qualification tested.Performance SpecificationsParameterMuxDemuxChannel Wavelength (nm)1530.33 ~ 1560.61 (21~ 59 ITU Grid)Center Wavelength Accuracy (nm)±0.05Minimum Channel Spacing (GHz)100(0.8nm)Channel Passband (@-0.5dB bandwidth) (nm)> 0.22Insertion Loss (dB)Add / Drop Ch.1 1.2Add / Drop Ch.2 1.5Express Ch. 1.4Add / Drop Channel Ripple (dB) 0.3Isolation @Add/DropChannel (dB)AdjacentN/A> 25Non-adjacentN/A> 40Express Channel Isolation (dB)> 25Insertion Loss Temperature Sensitivity (dB/ °C ) 0.003Wavelength Temperature Shifting (nm/°C ) 0.002Polarization Dependent Loss (dB) 0.10Polarization Mode Dispersion (ps) 0.1Directivity (dB) (Input to adds, Ouput to drops, adds to drops)> 50Return Loss (dB)> 45Power Handling (mW)300Operating Temperature (°C)0 ~ +70Storage Temperature (°C)-40 ~ +85Dimensions (mm)1U 2U 3USpecifications may change without noticeOrdering InformationOADM Channel SpacingNumber of Channel1st ITU ChannelPigtail StyleFiber LengthIn/Out Connector1=100GHz02=2 Channels48=48 ChannelsC21=1560.61nmC22=1559.79nmC23=1558.98nm1=Bare Fiber2=900um Jacket3=3mm Cable1=1m2=2m0=None1=FC/APC2=FC/PC3=SC/APC4=SC/PC5=ST 6=LCFeaturesApplications200GHz ITU Channel SpacingLow Insertion LossWide Pass BandHigh Channel IsolationHigh Stability and ReliabilityEpoxy Free Optical Path Channel Add / DropDWDM NetworkWavelength RoutingFiber Optical AmplifierCATV Fiberoptic System Fiberer’ 200GHz 1 Channel OADM utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging to achieve optical add or drop at a ITU wavelength. It provides ITU channel center wavelength, low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path . It can be used for wavelength add/drop in telecommunication network system. All Fiberer’ products are Telcordia qualification tested.Performance SpecificationsParameterMuxDemuxChannel WavelengthChannel Wavelength (nm)1530.33 ~ 1560.61 (21~ 59 ITU Grid)Center Wavelength Accuracy (nm)± 0.1Minimum Channel Spacing (GHz)200Channel Passband (@-0.5dB bandwidth) (nm)> 0.5Insertion Loss (dB)Add / Drop Ch. 1.2Express Ch. 1.0Add / Drop Channel Ripple (dB) 0.4Isolation @Add/DropChannel (dB)AdjacentN/A>30 |
