(1310nm 1480nm 1550nm) SLED Light Source

(1310nm 1480nm 1550nm) SLED Light Source

1310nm SLED Light Source Module (above)   1310 and 1550 SLED and 1550nm DFB Light Source (above)   Description: 1310nm SLED Broadband Light Source, Central wavelength 1310 ±10 nm, -3dB spectrum width ≥ 40 nm, Output power 1, 5, 10, 20, 30, 35 mW etc, Ripple ≤0.2 dB. OEM model is well available on customer’s special request.    Applications: Optical fiber sensing Optical fiber passive component spectrum testing Optical fiber grating, filter testing Optical fiber measurement equipments   Features: High output power High stability Broadband spectrum output   Specifications:                               Parameter SLED Central wavelength (nm) 1310 ±10 -3dB spectrum width (nm) ≥40, etc Output power (mW) 1, 5, 10, 20, 30, 35, etc Ripple (dB) ≤0.2 Output power short -term stability 1 ≤±0.01dB/15 min Output power long- term stability 2 ≤±0.03dB/8 hour Operating mode CW Fiber pigtail Single mode SMF-28 Output connector FC/PC, FC/UPC or FC/APC, etc Operating temperature (℃) 0 ~ 40 Storage temperature (℃) -20 ~ 70 Power supply 110/220V AC±10%, 50Hz, 20W Dimensions (L×W×H, mm) 90×70×19(Module), or 320×220×90(Desk-top) Remark: Stability is tested at room temperature 25±2℃ after pre-heating 30 minutes.                1. Test condition: fixed temperature, CW.                2. Test condition: temperature variation ±2℃, CW.   Typical Spectrum         Ordering Information OS-S Package Type Operating Wavelength Output Power LCD Display Power Adjustable Fiber Type Connector   M=Module  D=Desk-top 1310=1310nm 1480=1480nm 1550=1550nm  etc 1=1mW    10=10mW      20=20mW   etc 0=Without 1=With 0=Without 1=With S=SM Fiber P=PM Fiber M=MM Fiber FC/UPC     FC/APC etc

1480nm SLED Broadband Light Source Specification

Description: 1480nm SLED Broadband Light Source, Central wavelength 1480 ±10 nm, -3dB spectrum width ≥ 50 nm, Output power ≥ 5 mW, Ripple ≤0.2 dB. OEM model is well available on customer’s special request.   Applications: Optical fiber sensing Optical fiber passive component spectrum testing Optical fiber grating, filter testing Optical fiber measurement equipments   Features: High output power High stability Broadband spectrum output   Specifications:                                   Parameter SLED Central wavelength (nm) 1480 ±10 -3dB spectrum width (nm) ≥50, etc Output power (mW) ≥ 5 Ripple (dB) ≤0.2 Output power short -term stability 1 ≤±0.01dB/15 min Output power long- term stability 2 ≤±0.03dB/8 hour Operating mode CW Fiber pigtail Single mode SMF-28 Output connector FC/PC, FC/UPC or FC/APC, etc Operating temperature (℃) 0 ~ 40 Storage temperature (℃) -20 ~ 70 Power supply 110/220V AC±10%, 50Hz, 20W Dimensions (L×W×H, mm) 90×70×19(Module), or 320×220×90(Desk-top) Remark: Stability is tested at room temperature 25±2℃ after pre-heating 30 minutes.                1. Test condition: fixed temperature, CW.                2. Test condition: temperature variation ±2℃, CW.   Typical Spectrum       Ordering Information OS-S Package Type Operating Wavelength Output Power LCD Display Power Adjustable Fiber Type Connector   M=Module  D=Desk-top 1310=1310nm 1480=1480nm 1550=1550nm  etc 1=1mW    10=10mW      50=50mW   etc 0=Without 1=With 0=Without 1=With S=SM Fiber P=PM Fiber M=MM Fiber FC/UPC     FC/APC etc